Page 1
Quality control system on the production complies with requirements ISO 9001:2008 Dear customer, Company NOVATEK-ELECTRO LTD. thanks you for purchasing our products. You will be able to use properly the product after carefully studying the Operating Manual. Keep the Operating Manual throughout the service life of the product.
Page 2
Operating Manual. In compliance with the requirements of this Operating Manual and regulations the device is safe for use. Figure 1 – REV-225 visual appearance and setting dimensions REV-225 NOVATEK-ELECTRO...
REV-225 is a microprocessor-based device designed to be operated in automatic control systems with reference to the astronomical time (sunrise / sunset). The sunrise and sunset times are automatically calculated by REV-225 based on the coordinates entered and the current time that allows controlling the lighting without using the external sensors.
To improve operational properties of the device it is recommended to install the fuse or its analogue for 1 A current in power supply circuit for REV-225. 3.1.2.1 Connect REV-225 according to the diagram indicated in Fig. 2. ATTENTION! LOAD TERMINALS ARE DESIGNED FOR MAXIMUM VOLTAGE OF 300 V;...
Page 5
QF – Circuit breaker (fuse), at current is 16 А of class B; FU – А. fuse for current of 1 Figure 2 – Connection diagram of REV-225 3.1.2.2 Energize the device. 3.2 Device operation 3.2.1 Controls and display symbols The appearance of the display is shown in Fig.
Page 6
To enter the main menu, press the MENU button. After that, the symbol “Prog” appears on the display; If you do not press the buttons for two minutes, the REV-225 will automatically exit the settings menu; Use buttons to select the desired menu.
Page 7
Setting of the geographic location « » The user specifies the coordinates of REV-225 location (it is used to calculate the time of sunrise and sunset): latitude, longitude and time zone. Fig. 8 shows the diagram of the geographic location setting.
Page 8
ОК button. Adjusting range: 0 – 59; Choose adequate minute with « » – Exit from menu TIME the setting by pressing MENU button. Figure 9 - Time setting diagram Notes: – Long press button more then 0.5s, increase the numerical value quickly; REV-225 NOVATEK-ELECTRO...
Page 9
Free sum/win Freely programmed Freely programmed No sum/win None None Figure 11 - Summer/winter time setting diagram For setting of summer/winter mode necessary: – Select menu «DAT/TIME» and press ОК button; – Select menu «SU-WI» and press ОК button; REV-225 NOVATEK-ELECTRO...
Page 10
Set the adequate minute with Return to «C1-ON» sub-menu. Exit from the setting by pressing MENU button. – End the «NIGHT-BR» setting and exit. Notes: – Long press button more then 0.5s, increase the numerical value quickly; REV-225 NOVATEK-ELECTRO...
After adjustment, the device will turn on and off the load according to the set parameters, while the symbol “ ” (automatic mode) will be lit on the display. If the user needs to invert forcefully the load state, it is necessary simultaneously to press buttons, REV-225 NOVATEK-ELECTRO...
7 SHIPPING AND STORING REV-225 should be kept in the original packing in indoors premises with temperature from -45 up to +60 C and relative humidity not more than 80 % with absence of vapors in the air which are harmful for packing and details of the device.
Need help?
Do you have a question about the REV-225 and is the answer not in the manual?
Questions and answers