Novatek-electro RN-111M Operating Manual

Single phase voltage protection relay

Advertisement

Quick Links

NOVATEK-ELECTRO LTD
intellectual commercial electronics
RN-111M
SINGLE PHASE VOLTAGE
PROTECTION RELAY
OPERATING MANUAL
Review the Operating manual before using the unit.
www.novatek-electro.in
www.novatek-electro.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RN-111M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Novatek-electro RN-111M

  • Page 1 NOVATEK-ELECTRO LTD intellectual commercial electronics RN-111M SINGLE PHASE VOLTAGE PROTECTION RELAY OPERATING MANUAL Review the Operating manual before using the unit. www.novatek-electro.in www.novatek-electro.com...
  • Page 2 NEVER ATTEMPT TO OPERATE THE UNIT UNDER CONDITIONS OF HIGH HUMIDITY. Do not let water into the unit. WARNING! THE UNIT SHOULD BE OPERATED IN THE ELECTRIC MAINS PROTECTED WITH AUTOMATIC CIRCUIT BREAKER WITH THE BREAKING CURRENT OF 32 A, NO MORE. RN-111M NOVATEK-ELECTRO...
  • Page 3 – it automatically turns ON the power load with the user adjusted time delay.  If power load is less than 3,5 kW (16A) then RN-111M may operate with the power load directly using its own output terminals;...
  • Page 4 Maximal commutation current (active power load), A (no less than) Tripping Voltage level accuracy, V to 3 Minimal operation voltage level at which RN-111M will keep working, V Maximal operation voltage level at which RN-111M will keep working, V Voltage hysteresis, V (no less than)
  • Page 5 If power load is less than 16A (3,5 kW) then it could be commutated directly by the output contacts of the RN-111M; if the power load is more than 16A – then it should be commutated using contactor of appropriate rated parameters and the RN-111M should operate with the magnetic coil of the contactor.
  • Page 6 If the input voltage is more than 170V RN-111M will turn ON through time delay T and contacts1, 2(3) open and contacts 2(3), 4 close. If the voltage will get lower than 130V RN-111M will go to Alarm mode – contacts 2, 3(4) open and contacts 1(2), 3 close.
  • Page 7 5. STORAGE AND TRANSPORTATION CONDITIONS RN-111M should be stored in a factory package in enclosed rooms with ambient temperature from - 45° to +75° C and exposed to not more than 80% of relative humidity. It should be no fumes in the air that may exert a deleterious effect on package and the RN-111M components.

Table of Contents