Angelo Decor Nootka Falls Manual

Nootka Falls Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and arrange
all parts.
Locate and retrieve the light
connection from inside the
fountain.
Securely attach the light to the
transformer.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Locate the pre-installed tubing
and attach it to the pump.
Water flow can be adjusted using
the control dial on the front of the
pump.
To prevent the risk of water loss,
create a drip loop with the cables
from the lights.
Align the pump cord and light
cables with the groove. Slide the
pump access door in place.
AD97828
Place the pump (with tubing
attached) inside the fountain.
Printed in China