Angelo Decor AD97825 Manual

Terraced Falls Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and arrange
all parts.
Place the pump (with tubing and
lights attached) inside the body of
the fountain.
To prevent the risk of water loss,
create a drip loop with the cables.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Locate and attach the tubing to the
pump. If desired, the water flow can
be adjusted using the dial located on
the front of the pump.
Align the cord and slide the pump
access door in place.
AD97825
Locate the cords from the pre-
installed lights. Attach the light cords
to the corresponding connections
from the pump.
Printed in China