Angelo Decor Muskoka AD97815 Quick Start Manual

Muskoka Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and arrange all parts.
Retrieve the 3 to 1 connector from
inside the fountain.The light
connection must sit outside the
fountain.
IMPORTANT: to prevent water loss
during operation, create a drip-loop
with the 3 light cords by dipping them
into the reservoir before they exit out
the back of the fountain.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Locate the tubing from inside the
fountain and attach it to the pump.
Attach the cord from the connector to
the transformer.
Place the pump inside the reservoir of
the fountain.
AD97815
Printed in China