Angelo Decor Hollow Tree Falls Quick Start Manual

Hollow Tree Falls Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and
arrange all parts.
Align the pump cord and light cables with the groove.
Slide the pump access door in place.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Locate the pre-installed
tubing and attach it to
the pump.
Flow can be adjusted
using the control dial on
the front of the pump.
Locate and retrieve the
light connection from
inside the fountain.
To prevent the risk of
water loss, create a drip
loop with the cables from
the lights.
AD97831W
The light connection
should remain outside
the fountain.
Securely attach the
cable from the light
connection to the
transformer.
Printed in China