Angelo Decor Tofino AD97804 Quick Start Manual

Tofino Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this
item, DO NOT return the unit to place of purchase. Please visit our web site www.angelodecor.com for
assistance and warranty information.
Carefully unpack and arrange all
parts.
The pump is preset to the optimal
setting. Adjust water flow as
needed using the dial.
Place the pump inside the
fountain. Align the cords and
install the pump access door.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Retrieve the light connection from
inside the fountain.
The light connection must sit
outside the fountain.
Insert the pump into the included
PumpJacket™ pump filter.
Attach the cord from the lights to the
transformer.
AD97804
IMPORTANT: to prevent water
loss, create a drip-loop with the
light cords by dipping them into the
reservoir before they exit out the
back of the fountain.
Locate the tubing from inside the
fountain and attach it to the output
of the pump.
Printed in China