Video Mode; Taking A Geotagged Photo; Recorder - Gigabyte GSmart MW700 User Manual

User manual - gsmart mw700 english version
Hide thumbs Also See for GSmart MW700:
Table of Contents

Advertisement

8.2 Video Mode

The device camera can also be used as a
video recorder to record memorable moments
of your life.
1. Select Start > Programs > Multimedia >
Camera >
, or directly press and hold
Camera Key >
2. Focus on the picture you want to film and
press Camera Key to start video filming.
3. Press Camera Key again to stop filming.
4. Tap on
to change camera settings.
5. Select
on screen to enter Pictures &
Videos.
Video Menu:
Camera Mode: Tap on this icon to switch
to camera mode.
Pictures & Videos: view your video here.
Video Settings: to open the menu for
video recorder settings.
Settings:
1. Mode: you may select different recording
modes to fit the recording environment.
2. Effect: you may apply many different photo
effects.
3. Video Format: you can select the format
you would like to record in.
4. MMS Video: you can select to make a
recording especially for MMS.
to enter video mode.
MS800│8-2
5. Storage: Phone, microSD. (The storage
location will automatically change to
microSD card if the microSD card is
plugged in before launching video

Recorder).

6. Flicker Frequency: Auto, 50Hz, 60Hz
7. Confirm Frame: You can choose to
continue shooting, send MMS, not to save it,
or go to Pictures & Videos immediately
after recording a video clip.

8.3 Taking A GeoTagged Photo

You can take GeoTagged photos (photos that
carry the coordinates of where you were when
you took them) and easily share them with
friends through online albums like flickr.
1. After turning on the camera, tap the GPS
button
on the bottom left of the
preview screen to enable/disable the GPS
coordinates photograph function.
2. After turning on GPS, it will start searching
the current GPS coordination and the GPS
button will display as
3. When the device GPS has successfully
locked on satellite signals, the GPS button
will present the status as GPS ON
Under this mode, the photos you take will
carry the current coordinates of where you
are at in EXIF.
4. Aim the camera at the item you would like
to capture, press halfway to focus, full
press to take the picture.
5. Tap the
button to view the photo you
just took in "Pictures & Videos".
Note: For your ease of use, the filename
of photos with coordinates always ends
with (GPS) on this device. Example:
Camera0024 (GPS).jpg
8.4 Recorder
Use recorder to record voice memo and make
note taking simple and efficient.
.
.

Advertisement

Table of Contents
loading

Table of Contents