Internet Sharing - Gigabyte GSmart MW700 User Manual

3. If you want this device to be detected by
other Bluetooth devices, please check
"Make this device discoverable to other
devices". (Without checking this item, other
Bluetooth devices are unable to detect this
device.)
4. Select Devices tab to show all connections
formed.
5. On Devices tab screen, tap "Add New
Device" to scan for other Bluetooth devices
within effective area.
6. On Devices tab screen, select the device to
be connected, and then select "Next". The
screen will prompt for password. After
inputting password on password input
screen, select "Next".
7. If the password entered is correct, the
connection will be form.
Note: Optional Bluetooth accessories
such as Bluetooth headset are available.
Please contact your local dealer for
information.
Com Ports
For example, when you purchase Bluetooth
GPS supported navigation software; you can
register this device as an effective serial port
by following the instructions on the manual of
that product and the steps below:
Select Start > Settings > Connections tab >
Bluetooth > COM ports tab.
Registering New Serial Port:
1. Select "New Incoming Port" to enter setup
screen.
2. Select a port to be set.
3. Select "Finish".

6.7 Internet Sharing

You can set the device as a wireless modem.
Internet Sharing allows your PC/Notebook be
connected to a wireless network. Before
creating a new modem via the selected
connection type, you still need to install the
drivers on your PC/Notebook. If you would like
to connect to PC using a USB cable, you will
need to install ActiveSync 4.5 or later version
on your PC. Please find the drivers in the
ActiveSync and Application Software CD.
1. Tap Start > Programs > Phone Manager >
Internet Sharing.
2. Select a USB or Bluetooth PAN as PC
Connection type.
3. Connect your phone via USB cable or
Bluetooth to a PC/Notebook, and then tap
"Connect".
MW700│6-3