Lock/Unlock; Power - Gigabyte GSmart MW700 User Manual

Note: Using any battery pack or AC
adapter (charger) not specified/endorsed
by GSmart on this phone may be
dangerous and may invalidate any
warranty and approval given to the
device. Unplug the charger from the
power supply when it is not in use.
Charging the battery
Please make sure that the battery is installed
and fully charged when using your MW700 for
the first time. You may charge the battery in
the following ways:
1. Universal AC Adapter: Plug your AC
adapter into a suitable main power socket
and plug the connector to the charging slot
of your MW700. The phone will start
charging automatically.
2. USB cable: Connect your MW700 to your
PC's USB port with the USB cable supplied
in your package.

1.6 Lock/Unlock

1. Lock the device:
On Today screen, tap Device unlocked to lock
the device. The device will not respond to
touches on screen nor react to any input on the
keypad when it is locked.
You may also enable the device lock
automatically after the screen backlight is
turned off.
2. Unlock the device:
Tap Unlock on the bottom left of the screen.
Then tap Unlock button on the newly appeared
screen and the device is unlocked.

1.7 Power

Power on
While the device is powered off, press Power
key on the top of the device to power it on.
Power off
While the power is on, press and hold Power
key on the top of the device for about 5
MW700│1-4