Video Mode; Taking A Geotagged Photo - Gigabyte GSmart MW702 User Manual

8.2 Video Mode

The device camera can also be used as a video
recorder to record memorable moments of your life.
1. Select Start > Programs > Multimedia > Camera
> , or directly press, and hold Camera Key >
to enter into video mode.
2. Focus on the picture you want to film and press
Camera Key to start video filming.
3. Press Camera Key again to stop filming.
4. Tap to change camera settings.
5. Select on screen to enter into Pictures &
Videos.
Video Menu:
Camera Mode: Tap this icon to switch to
camera mode.
Pictures & Videos: View your video here.
Video Settings: Open the menu for video
recorder settings.
Video Settings:
1. Mode: You may select different recording modes
to fit the recording environment.
2. Effect: You may apply many different photo
effects.
3. Video Format: You can select the wanted format
to record a film.
4. MMS Video: You can select to make a recording
especially for MMS.
5. Storage: Phone, Memory Card. (The storage
location will automatically change to Memory
Card, if Memory Card is plugged in before
launching video Recorder).
6. Confirmation: On or Off.

8.3 Taking a GeoTagged Photo

You can take GeoTagged photos (photos that carry
the coordinates of where you were when you took
them) and easily share them with friends through
online albums like Flickr.
1. After turning on the camera, tap the GPS button
on the lower-left corner of the preview
screen to enable/disable the GPS coordinates
photograph function.
2. After turning on GPS, it will start to search the
current GPS coordination, and the GPS button
will display as
3. When GPS has successfully connected to
satellite signals, the GPS button will become
GPS ON
take will carry the current coordinates of where
you are at EXIF.
4. Aim at the item you would like to shoot, and then
make half press to focus. Make a full press to
take a picture.
5. Tap get into "Pictures & Videos" and view
the photo you just shoot.
MW702│ 8-2
.
. Under this mode, the photos you