Chapter 4 Using The Internet; Connecting To The Internet - Gigabyte Sierra S1 User Manual

4.1 Connecting to the Internet

Your phone connects to the Internet via:
 Wi-Fi
 GPRS/ EDGE/ 3G/ 3.5G
NOTE:
If you connect to the Internet, you may be charged.
you need to tap Application Drawer > APPS tab >
connection to unmark data enabled.
Wi-Fi
1. Tap Application Drawer > APPS tab >
2. Switch to turn "Wi-Fi" on or off.
To connect to a Wi-Fi network
1. Tap "Wi-Fi", check Wi-Fi function and turn it on. Begin to search the available Wi-Fi
networks.
2. Detected networks are displayed below. Tap one network then tap "Connect".
3. If you select an open network, the connection is established automatically.
4. To connect a secured connection, you will be prompted for the password. Enter the
password and then tap "Connect".
5. When Wi-Fi is connected, the connection icon
To add Wi-Fi network
1. Tap Application Drawer > APPS tab >
2. On Wi-Fi screen, tap
3. Follow the on-screen instructions and enter the necessary information, then tap "Save" to
finish the settings.
To configure Wi-Fi settings
1. Tap Application Drawer > APPS tab >
2. Tap Menu > Advanced to check the Wi-Fi settings.
Tethering & portable hotspot
1. Share your phone's mobile data connection via USB, Bluetooth, or as a portable Wi-Fi
hotspot.
2. Tap Application Drawer > APPS tab >
3. You can turn on/off USB tethering, Portable Wi-Fi hotspot, Bluetooth tethering and
configure the Wi-Fi hotspot settings.
VPN settings
1. Tap Application Drawer > APPS tab >
2. You must set lock screen pattern, PIN or password before using credential storage.
Please tap "OK" go to Unlock selection, then choose which way you want to lock the
screen.
3. After you set it up. It will go back to VPN screen.
4. Tap "Add VPN network" to edit VPN network.
5. After filling in all necessary information, tap "Save" to finish the settings.
To start a data connection
If you set up multiple data connections, select the connection you want to use.
1. Tap Application Drawer > APPS tab >
2. Choose a SIM card you want to enable data access over Mobile network.
Enabling data roaming
Please set up your data connection first, and then follow the steps as below:
4. Using the Internet
> Wi-Fi.
> Wi-Fi.
. And an on-screen window will pop-up.
> Wi-Fi.
> More > Tethering & portable hotspot.
> More > VPN.
> SIM management > Data connection.
Sierra S1｜4-1
Using the Internet
If you want to stop the connection,
> SIM management > Data
will be displayed on the status bar.