Lock/Unlock - Gigabyte GSmart MS802 User Manual

Charging the battery
Please make sure that the battery is installed and
fully charged when using your MS802 for the first
time. You may charge the battery in the following
ways:
1. Universal AC Adapter: Plug your AC adapter into
a suitable main power socket, and plug the
connector to the charging slot of your MS802.
The phone will start charging automatically.
2. USB cable: Connect your MS802 to your PC's
USB port with the USB cable supplied in your
package.
Open Battery Cover
1. Check the bottom of your device, and then you will
find a button.
2. Push this button.
3. Pull the battery cover to open it.

1.6 Lock/Unlock

1. Lock the device:
On Today screen, tap "Device unlocked" to lock
the device. The device will not respond to
touches on screen nor react to any input on the
keypad, when it is locked.
You may also enable the device to lock automatically
after the screen backlight is turned off.
2. Unlock the device:
Tap "Unlock" on the lower-left corner of the
screen. Then tap "Unlock" button on the newly
appeared screen, and the device is unlocked.
MS802│ 1-4