CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
Auto Detect DIMM/PCI Clk
Spread Spectrum
** Current Host Clock is
Host Clock at Next Boot is
** Current DRAM Clock is **
DRAM Clock at next Boot is
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Auto Detect DIMM/PCI Clk
This item allows you to enable/disable auto detect DIMM/PCI Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host Clock at next Boot is
This item allows you to select CPU frequency step by step increasing
The choice are: 100MHz∼133MHz, 133MHz∼166MHz.
DRAM Clock at next Boot is
This field displays the capability of the memory modules that you can use
The choice is either 100MHz or 133MHz (only select CPU Frequency 100MHz.)
3-12 Load Standard/Optimized Defaults
Load Standard Defaults
When you press <Enter> on this item, you get confirmation dialog box with a message similar
Miscellaneous Control
Enabled
Disabled
100MHz
100MHz
F6:Optimized Defaults
35
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults