Wake Up Events - JETWAY V266BR4A User Manual

ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.
Video Off Option
This determines the manner in which the monitor is blanked. The choice are Suspend → off,
All Modes → Off, and Always On.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS (default)
Blank Screen
V/H SYNC+Blank
Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Power Button Function
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state. The settings are: Delay 4 Sec, Instant-Off.

Wake Up Events

Please refer to section 3-8-1
3-8-1 Wake up Events
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
VGA
LPT & COM
HDD & FDD
PCI Master
Wake-Up on Ring
Wake-Up on PCI PME
PS2 KB Wakeup Selection
Wake-Up On Hot Key (PS2 KB)
Wake-Up on RTC Alarm
x Date of Month Alarm
x Time (hh:mm:ss) Alarm
> IRQs Activities
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Wake Up On Ring/PME
Initial display power management signaling.
This option only writes blanks to the video buffer.
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video
buffer.
Wake Up Events
OFF
LPT/COM
ON
OFF
Disabled
Disabled
Hot Key
Disabled
Disabled
0
0 : 0 : 0
Press Enter
F6:Optimized Defaults
31
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults