JETWAY V266BR4A User Manual page 18

(1) Line-In/Out, MIC Header (9-pin): AUDIO
This header connect to Front Panel Line-In, Line-out, MIC connector with cable.
(2) USB Port Header (9-pin) : USB1
This header is used for connecting the additional USB port plug. By attaching an option
USB cable, your can be provided with two additional USB plugs affixed to the back
panel.
(3) IDE Activity LED: IDE LED
This connector connects to the hard disk activity indicator light on the case.
(4) Turbo LED switch: TB LED
Since the motherboard's turbo function is always on. The turbo LED will remain
constantly on while the system power is on. You may wish to connect the Power LED
from the system case to this lead. See the figure below.
(5) Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting your
computer without having to turn off your power switch. This is a preferred method of
rebooting in order to prolong the lift of the system's power supply. See the figure
below.
(6) Speaker connector: SPEAKER
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(7) Power LED: PWR LED
Pin 1
AUDIO
L-IN-R
L-IN-L
G ND G ND
MICP
MIC
G ND
L-O UT-L L-O UT-R
Line-In/Out, MIC Headers
USB1
Pin 1
USB Port Connector
16