Table of Contents
Advertisement
(10) FAN Speed Headers (3-pin) : SFAN1, SYSFAN, CPUFAN
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the fan
manufacturer, the wire and plug may be different. The red wire should be positive, while
the black should be ground. Connect the fan's plug to the board taking into consideration
the polarity of connector.
(11) IR infrared module Headers (9-pin) : IR
This connector supports the optional wireless transmitting and receiving infrared module.
You must configure the setting through the BIOS setup to use the IR function.
(12) CD Audio-In Headers (4-pin) : CD_IN
CD_IN is the connector for CD-Audio Input signal.
CD-Audio output connector.
CPUFAN
3
1
SYSFAN
1
3
SFAN1
3
1
FAN Speed Headers
Pin 1
IR
2
NC
VCC5
IRTX
5
6
IR infrared module Headers
CD_IN
4
1
CD Audio-In Headers
18
GND
IRRX
Please connect it to CD-ROM
Advertisement
Table of Contents
Need help?
Do you have a question about the PT800DB - REV 1.0 and is the answer not in the manual?
Questions and answers