1. Manuals
  2. Brands
  3. JETWAY Manuals
  4. Motherboard
  5. P4845GLM1A
  6. User manual

JETWAY P4845GLM1A User Manual

M/b for socket 478 pentium 4 processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P4845GLM
USER'S MANUAL
M/B For Socket 478 Pentium 4 Processor
NO. G03-P4845G1A
Release date: October 2002
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P4845GLM1A and is the answer not in the manual?

Questions and answers

Related Manuals for JETWAY P4845GLM1A

Summary of Contents for JETWAY P4845GLM1A

  • Page 1 P4845GLM USER'S MANUAL M/B For Socket 478 Pentium 4 Processor NO. G03-P4845G1A Release date: October 2002 Trademark: * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

  • Page 2: Table Of Contents

    TABLE OF CONTENT USER’S NOTICE ......................1 MANUAL REVISION INFORMATION ................1 COOLING SOLUTIONS ....................1 CHAPTER 1 INTRODUCTION OF P4845GLM MOTHERBOARD 1-1 FEATURE OF MOTHERBOARD................2 1-2 SPECIFICATION .....................3 1-3 PERFORMANCE LIST ...................4 1-4 LAYOUT DIAGRAM & JUMPER SETTING ............5 CHAPTER 2 HARDWARE INSTALLATION 2-1 HARDWARE INSTALLATION STEPS ..............7 2-2 CHECKING MOTHERBOARD'S JUMPER SETTING........7 2-3 INSTALL CPU ......................8...

  • Page 3: User's Notice

    USER’S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF MANUFACTURER.

  • Page 4: Chapter 1 Introduction Of P4845Glm Motherboard

    Introduction of P4845GLM Motherboard 1-1 Feature of motherboard The P4845GLM motherboard is design for use Intel Pentium 4 Processor in 478 Pin Package/Northwood Processor with the Intel 845GL Chipset delivers a high performance and professional desktop platform solution. Which utilize the Socket 478 design and the memory size expandable to 2.0GB.

  • Page 5: Performance List

    Spec Description ∗ Micro ATX form factor 4 layers PCB size: 24.4x22.0cm Design ∗ Intel 845GL Graphics Memory Controller Hub (GMCH) Chipset Chipset ∗ Intel 82801DB I/O Controller Hub (ICH4) Chipset ∗ Support Intel Pentium 4 478 Pin package utilizes Flip-Chip Pin CPU Socket (mPGA478B Socket) Grid Array (FC-PGA2) package processor...

  • Page 6: Layout Diagram & Jumper Setting

    The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) Performance Test Report CPU:...
  • Page 7 GAME/MIDI PORT PRINT PS/2 MOUSE PS/2 Keyboard COM1 LINE-IN LINE-OUT CPU FAN CPU Socket PS2 KB/Mouse Port USB Port 2M Flash ROM BIOS COM2 Connector Power FAN DDR SDRAM DIMM x2 PC99 Back Panel Intel 845GL Chipset ATX 12V Power Conn. ATA 100 IDE Conn.

  • Page 8: Chapter 2 Hardware Installation

    CPU Frequency Select 3-pin Block CMOS RAM Clear 3-pin Block On board AC97’ Codec Selector 3-pin Block Connectors Connector Name Description Page ATX Power Connector 20-pin Block P.12 ATX 12V Power Connector 4-pin Block P.12 KBMS PS/2 Mouse & PS/2 Keyboard 6-pin Female P.13 Connector...

  • Page 9: Hardware Installation Steps

    2-1 Hardware installation Steps Before using your computer, you had better complete the following steps: 1. Check motherboard jumper setting 2. Install CPU and Fan 3. Install System Memory (DIMM) 4. Install Expansion cards 5. Connect IDE and Floppy cables, Front Panel /Back Panel cable 6.

  • Page 10: Install Cpu

    3. After over clocking system boot fail 1-2 closed Normal (Default) 2-3 closed Clear CMOS CMOS RAM Clear Setting (3) On-board AC97’ Codec Selector (3-pin) : JP6 1-2 closed Enabled (Default) 2-3 closed Disabled On-board AC97’ Codec Selector 2-3 Install CPU 2-3-1 Glossary Chipset (or core logic) - two or more integrated circuits which control the interfaces between the system processor, RAM, I/O devises, and adapter cards.

  • Page 11: About Intel Pentium 4 478-Pin Cpu

    speakers, MIC, game controllers, and MIDI sound devices. LAN (interface) - Local Area Network - the interface to your local area network. BIOS (Basic Input/Output System) - the program logic used to boot up a computer and establish the relationship between the various components. Driver - software, which defines the characteristics of a device for use by another device or other software.

  • Page 12: Expansion Card

    This motherboard provides 184-pin DUAL INLINE MEMORY MODULES (DIMM) sites for memory expansion available from minimum memory size of 64MB to maximum memory size of 2.0GB DDR SDRAM. Valid Memory Configurations Bank 184-Pin DIMM Total Memory Bank 0, 1 (DDR1) DDR200/DDR266 64MB∼1.0GB DDR SDRAM Module...

  • Page 13: Procedure For Expansion Card Installation

    WARNING! Turn off your power when adding or removing expansion cards or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards. 2-5-1 Procedure For Expansion Card Installation 1. Read the documentation for your expansion card and make any necessary hardware or software setting for your expansion card such as jumpers.

  • Page 14: Connectors, Headers

    √ Slot 1 √ Slot 2 √ Slot 3 √ Onboard VGA √ Onboard LAN √ Onboard USB 1 √ Onboard USB 2 √ Onboard USB 3 √ AC97/MC97 IMPORTANT! If using PCI cards on shared slots, make sure that the drivers support “Shared IRQ”...
  • Page 15 Pin 1 PS/2 Mouse & PS/2 Keyboard Connector: KBMS The connectors for PS/2 keyboard and PS/2 Mouse. USB Port connector: USB1 The connectors are 4-pin connector that connect USB devices to the system board. Parallel Port Connector (25-pin female): LPT1 Parallel Port connector is a 25-pin D-Subminiature Receptacle connector.
  • Page 16 Pin 1 Floppy Drive Connector (10) Primary IDE Connector (40-pin block): IDE1 This connector supports the provided IDE hard disk ribbon cable. After connecting the single plug end to motherboard, connect the two plugs at other end to your hard disk(s). If you install two hard disks, you must configure the second drive to Slave mode by setting its jumpers accordingly.

  • Page 17: Headers

    2-6-2 Headers Serial Port2 COM2 Header (9-pin) : COM2 CO M2 Note: Orient the read marking on the COM2 ribbon cable to pin 1 Pin 1 Serial Port2 COM2 Header Line-Out, MIC Headers (9-pin): Front AUDIO This header connect to Front Panel Line-out, MIC connector with cable. AUDIO AUD - FPO UT - L AUD - RET - L...
  • Page 18 Speaker connector: SPK This 4-pin connector connects to the case-mounted speaker. See the figure below. Power LED: PWRLED The Power LED is light on while the system power is on. Connect the Power LED from the system case to this pin. Power switch: PSON This 2-pin connector connects to the case-mounted power switch to power ON/OFF the system.
  • Page 19 CPUFAN PWRFAN CHSFAN FAN Speed Headers (11) IR infrared module Headers (5-pin) : IR This connector supports the optional wireless transmitting and receiving infrared module. You must configure the setting through the BIOS setup to use the IR function. Pin 1 Infrared Module Headers (12) CD Audio-In Headers (4-pin) : CD_IN CDIN are the connectors for CD-Audio Input signal.

  • Page 20: Starting Up Your Computer

    2-7 Starting Up Your Computer 1. After all connection are made, close your computer case cover. 2. Be sure all the switch are off, and check that the power supply input voltage is set to proper position, usually in-put voltage is 220V∼240V or 110V∼120V depending on your country’s voltage used.

  • Page 21: Chapter 3 Introducing Bios

    Chapter 3 Introducing BIOS The BIOS is a program located on a Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gain control. The BIOS first operates an auto-diagnostic test called POST (power on self test) for all the necessary hardware, it detects the entire hardware device and configures the parameters of the hardware synchronization.

  • Page 22: The Main Menu

    3-3 The Main Menu Once you enter Award  BIOS CMOS Setup Utility, the Main Menu (Figure 3-1) will appear on the screen. The Main Menu allows you to select from fourteen setup functions and two exit choices. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.

  • Page 23: Standard Cmos Features

    Load Optimized Defaults Use this menu to load the BIOS default values that are settings for optimal performances system operations. Load Standard Defaults Use this menu to load the BIOS default values that are factory settings for the stable performance system operation. Set Supervisor/User Password Use this menu to set User and Supervisor Passwords.

  • Page 24: Advanced Bios Features

    The time format is <hour><minute><second>. Primary Master/Primary Slave Secondary Master/Secondary Slave Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category.
  • Page 25 Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep. Disabled (default) No warning message to appear when anything attempts to access the boot sector or hard disk partition table.

  • Page 26: Advanced Chipset Features

    Keystrokes repeat at a rate determined by the keyboard controller. When enabled, the typematic rate and typematic delay can be selected. The settings are: Enabled/Disabled. Typematic Rate (Chars/Sec) Sets the number of times a second to repeat a keystroke when you hold the key down. The settings are: 6, 8, 10, 12, 15, 20, 24, and 30.

  • Page 27: Dram Timing Settings

    Select Enabled allows caching of the video BIOS, resulting in better system performance. However, if any program writes to this memory area, a system error may result. The settings are: Enabled and Disabled. Memory Hole At 15M-16M You can reserve this area of system memory for ISA adapter ROM. When this area is reserved, it cannot be cached.

  • Page 28: Integrated Peripherals

    CMOS Setup Utility – Copyright(C) 1984-2002 Award Software Integrated Peripherals > Onboard IDE Function Press Enter Item Help > Onboard Device Function Press Enter > Onboard Super IO Function Press Enter Init Display First PCI Slot Menu Level > Power On Function Button Only KB Power On Password Enter...

  • Page 29: Onboard Device Function

    The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide successively increased performance. In Auto mode, the system automatically determines the best mode for each device.

  • Page 30: Onboard Super Io Function

    CMOS Setup Utility – Copyright(C) 1984-2002 Award Software Onboard Super IO Function Onboard FDD Controller Enabled Item Help Onboard Serial Port 1 3F8/IRQ4 Onboard Serial Port 2 2F8/IRQ3 UART2 Mode Normal Menu Level >> RxD, TxD Active Hi, Lo IR Transmission Delay Enabled IR Duplex Mode Half...
  • Page 31 The Power Management Setup allows you to configure your system to most effectively save energy saving while operating in a manner consistent with your own style of computer use. CMOS Setup Utility – Copyright(C) 1984-2002 Award Software Power Management Setup ACPI Function Enabled Item Help...

  • Page 32: Pm Timer Reload Events

    Time(hh:mm:ss) Alarm You can choose what hour, minute and second the system will boot up. Note: If you have change the setting, you must let the system boot up until it goes to the operating system, before this function will work PM Timer Reload Events Please refer to section 3-8-1 3-8-1 PM Timer Reload Events...

  • Page 33: Irq Resources

    Data (ESCD) when you exit Setup if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the operating system can not boot. The settings are: Enabled and Disabled. Resource Controlled By The Award Plug and Play BIOS has the capacity to automatically configure all of the boot and Plug and Play compatible devices.

  • Page 34: Miscellaneous Control

    only available if there is Hardware Monitor onboard. CMOS Setup Utility – Copyright(C) 1984-2001 Award Software PC Health Status Shutdown Temperature Disabled Item Help CPU Warning Temperature Disabled Show PC Health in Post Enabled 25 ° C Current System Temperature 38 °...

  • Page 35: Load Standard/Optimized Defaults

    CMOS Setup Utility – Copyright(C) 1984-2002 Award Software Miscellaneous Control CPU Clock Ratio Item Help Auto Detect PCI Clk Enabled Spread Spectrum Disabled ** Current Host Clock is 100/33MHz ** Menu Level > HOST/PCI Clock at Next Boot is 100/33MHz ** Current DRAM Clock is 133MHz ** DRAM Clock at Next Boot is 133MHz...

  • Page 36: Set Supervisor/User Password

    Load Standard Defaults (Y/N)? N Pressing <Y> loads the BIOS default values for the most stable, minimal-performance system operations. Load Optimized Defaults When you press <Enter> on this item, you get a confirmation dialog box with a message similar to: Load Optimized Defaults (Y/N)? N Pressing <Y>...

  • Page 37: Magic Install Supports Windows 95/98/98Se/Nt4.0/2000

    CD also include an auto detect software which can tell you which hardware is installed, and which DRIVERS needed so that your system can function properly. We call this auto detect software MAGIC INSTALL. MAGIC INSTALL Supports WINDOWS 98SE/ME/NT4.0/2000/XP Insert CD into your CD-ROM drive and the MAGIC INSTALL Menu should appear as below. If the menu does not appear, double-click MY COMPUTER / double-click CD-ROM drive or click START / click RUN / type X:\SETUP.EXE (assuming X is your CD-ROM drive).

  • Page 38: Vga Install Intel 845G Vga Driver

    1. Click INF in the MAGIC INSTALL MENU 2. Click NEXT when Chipset Software Install Utility appears 3. This chart shows motherboards supported by 4. Select if you want computer re-started click the driver click Yes Finish NOTE: MAGIC INSTALL will auto detect file path X:\INTEL845\INF\SETUP.EXE This driver supports WINDOWS 98SE/ME/2000/XP (NT4.0 do not require) 4-2 VGA...

  • Page 39: Sound Install Alc Audio Codec Driver

    1. Click VGA when MAGIC INSTALL MENU Click NEXT When Intel (R) Brookdale-G- appears 830M Chipset Graphics Driver Software Setup Click YES, This is Announce CopyRight 4. If You Want Re-start Computer , Click FINISH 4-3 SOUND Install ALC Audio Codec Driver 1.
  • Page 40 3. Click Finish and Restart Windows 4. Click Start→Program→Avance Sound Manager→AvRack. Then AVRACK Windows appears NOTE: MAGIC INSTALL will auto detect file path: X:\CODEC\ALCCODEC\SETUP.EXE (for WINDOWS 98SE/ME/NT4.0/2000/XP) You need setting the “Environment Form Sound Effect” before you want to change 4/6 channel speaker output (Example: Room\Livingroom…..) 5.
  • Page 41 3. This is license agrement, select "I Accept the 4. Click NEXT and Enter your Customer terms" and Click NEXT Information, Click NEXT or choose Change to change the path for the file to be stored 5. Click INSTALL, Start to install the software 6. Setup Complete and click FINISH 7.

  • Page 42: Magic Bios Install Bios Live Update Utility

    4-5 MAGIC BIOS Install BIOS Live Update Utility 1. Click Magic BIOS when Magic Install 2. Click Next to install the Magic BIOS in MENU appears Destination Folder 3. After finish Setup you will have a Magic 4. Double click the Magic BIOS icon you will BIOS icon in your screen have this picture, choose from internet you can upgrade BIOS On-line...

  • Page 43: Iaa

    When choose From Local Driver to update 10. Choose the correct BIOS file to update BIOS BIOS, you must have the correct BIOS file in your Local Driver 4-6 IAA Install Application Accelerator Software The Intel Application Accelerator is designed to improve performance of the storage sub-system and overall system performance.

  • Page 44: How To Disable On-Board Sound

    4-8 HOW TO DISABLE ON-BOARD SOUND Enter BIOS SETUP choose INTEGRATE PERIPHERALS choose ON-CHIP DEVICE FUNCTION choose AC97 SOUND DEVICE Disable on-board sound function by press PAGE DOWN KEY to Disable 4-9 HOW TO UPDATE BIOS Before update BIOS users have to “Disable”, “Flash Part Write Protect” item which in “Miscellaneous Control”...

This manual is also suitable for:

P4845glm

Table of Contents