Pm Wake Up Events - JETWAY 650DFR1A User Manual

ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power
Management (ACPI). The settings are Enabled and Disabled.
Video Off Option
This determines the manner in which the monitor is blanked. The choice are Suspend →
off, All Modes → Off, and Always On.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS (default)
Blank Screen
V/H SYNC+Blank This selection will cause the system to turn off the vertical and
Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Power Button Function
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state. The settings are: Delay 4 Sec, Instant-Off.

PM Wake Up Events

Please refer to section 3-8-1
3-8-1 PM Wake Up Events
CMOS Setup Utility – Copyright(C) 1984-2002 Award Software
IRQ [3-7,9-15],NMI
IRQ 8 Break Suspend
RING Power Up Control
MACPME Power UP Control
KB Power ON Password
Power Up by Alarm
x Month Alarm
x Day of Month Alarm
x Time (hh:mm:ss) Alarm
↑↓→← Move Enter:Select
F5:Previous Values
Initial display power management signaling.
This option only writes blanks to the video buffer.
horizontal synchronization ports and write blanks to the video
buffer.
PM Wake Up Events
Enabled
Disabled
Disabled
Disabled
Enter
Disabled
NA
NA
0 : 0 : 0
+/-/PU/PD:Value F10:Save ESC:Exit
F6:Optimized Defaults
30
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults