Onchip Device Function; Onchip Super Io Function - JETWAY 650DFR1A User Manual

IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector read/write.
If your IDE hard drive supports block mode (most new drives do), select Enabled for
automatic detection of the optimal number of block read/writes per sector the drive can
support. The settings are: Enabled, Disabled.

3-7-2 OnChip Device Function

CMOS Setup Utility – Copyright(C) 1984-2002 Award Software
USB Controller
USB Keyboard Legacy Support
1394 Controller
ETHERNET Function
ETHERNET Address IDE Input
Current ETHERNET Address is
↑↓→← Move Enter:Select
F5:Previous Values
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you
have a USB peripherals. The settings are: Enabled, Disabled.
USB Keyboard Legacy Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you
have a USB keyboard. The settings are: Enabled, Disabled.
ETHERNET Address ID Input
This item allows you to setting the Mac address from 000000 to FFFFFF.
3-7-3 Onboard SuperIO Function
CMOS Setup Utility – Copyright(C) 1984-2002 Award Software
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART2 Mode
IR Duplex Mode
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
↑↓→← Move Enter:Select
F5:Previous Values
OnChip Device Function
Enabled
Disabled
Enabled
Enabled
Press Enter
003018-XXXXXX
+/-/PU/PD:Value F10:Save ESC:Exit
F6:Optimized Defaults
Onboard SuperIO Function
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Half
378/IRQ7
SPP
3
+/-/PU/PD:Value F10:Save ESC:Exit
F6:Optimized Defaults
28
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults