Shelly Wave 1 Mini User And Safety Manuallines

Hide thumbs Also See for Wave 1 Mini:

Download this manual

Wave 1 Mini

LEGEND

Device terminals:

• N: Neutral terminal

• L: Live terminal (110–240 V AC)

• SW (SW1): Switch/push-button input terminal (controlling

O (O1))

• I: Load circuit input terminal

• O (O1): Load circuit output terminal (1)

Wires:

• N: Neutral wire

• L: Live wire (110-240 V AC)

Button:

• S: S button (Fig. 2)

Fig.1/

Abb.1/

Imagen 1/

Image 1

Fig.2/

Abb.2/

Imagen 2/

Image 2

Need help?

Do you have a question about the Wave 1 Mini and is the answer not in the manual?

Page 1 Wave 1 Mini Fig.1/ Abb.1/ Imagen 1/ Image 1 Fig.2/ Abb.2/ Imagen 2/ Image 2 LEGEND Device terminals: • N: Neutral terminal • L: Live terminal (110–240 V AC) • SW (SW1): Switch/push-button input terminal (controlling O (O1)) • I: Load circuit input terminal •...
Page 2 (if any). Shelly Europe Ltd. is not responsible for any loss or dam- age in case of incorrect installation or improper operation of this device due to failure of following the user and safety instructions in this guide.
Page 3 CAUTION! Do not allow children to play with the push-but- tons/switches connected to the Device. Keep the devices for remote control of Shelly Qubino (mobile phones, tablets, PCs) away from children. EXTENDED USER GUIDE For more detailed installation instructions,...
Page 4 DECLARATION OF CONFORMITY Hereby, Shelly Europe Ltd. declares that the radio equipment type Wave 1 Mini is in compliance with Directive 2014/53/ EU, 2014/35/EU, 2014/30/EU, 2011/65/EU. The full text of the EU declaration of Conformity is available at the following internet address: https://shelly.link/Wave1Mini-DoC...