Step B. Request A Certificate; Step C. Approve The Request - Netscape MANAGEMENT SYSTEM 6.01 Installation And Setup Manual

Select the "Use OCSP to verify only certificates that specify an OCSP service
5.
URL" option, and click OK.
Click on the Close button.
6.

Step B. Request a Certificate

The steps outlined below explain how to request a client certificate from the
Certificate Manager using the manual enrollment method. If you've configured the
Certificate Manager for automated certificate issuance, for example for
directory-based enrollment, you may use the appropriate form and request a
certificate.
To request a client or personal certificate from the Certificate Manager:
Go to the end-entity interface of the Certificate Manager you configured (or to
1.
the Registration Manager that's connected to this Certificate Manager). The
URL is in this form:
https://<hostname>:<end_entity_HTTPS_port>
http://<hostname>:<end_entity_HTTP_port>
In the left frame, under Browser, click Manual.
2.
This opens the manual enrollment form.
Fill in all the values and submit the request.
3.
The client prompts you to enter the password for your key database.
When you enter the correct password, the client generates the key pairs.
4.
Do not interrupt the key-generation process.

Step C. Approve the Request

Skip this step if you requested the certificate using any of the automated
enrollment methods. Complete this step if you used the manual enrollment form
for requesting the certificate; the request you submitted is waiting in the agent
queue for approval by an agent.
To approve the request:
Go to the Certificate Manager's Agent Services interface.
1.
The URL is in this format:
In the left frame, click List Requests.
2.
https://<hostname>:<agent_port>
Chapter 21
Setting Up a Remote OCSP Responder
or
Setting Up an OCSP Responder 709