Netscape MANAGEMENT SYSTEM 6.01 Installation And Setup Manual page 267

Click Next to submit the request.
c.
The Certificate Request Result screen appears, confirming that the request
has been submitted. Note the request ID provided in the response
message. (You can use it later to retrieve the certificate, once it has been
issued, from the end-entity port.)
Note that your request gets added to the agent queue of the Certificate
Manager for approval by that Certificate Manager's agent. If you've
permission to access that Certificate Manager's Agent interface, you can
follow the instructions below to issue the certificate. Otherwise, you
should wait for the other agent to approve your request and issue the
certificate.
In the web browser window, enter the URL for the Certificate Manager's
d.
Agent Services page. (You must use the same computer where you got
your agent certificate.)
Select List Requests, then click Show Pending Requests and click Find. The
e.
pending request list is displayed.
Locate your request, click Details to see it, and make any changes. Then
f.
scroll down to the bottom of the form and click Do It.
After the certificate is generated, click Show Certificate.
g.
When the certificate is displayed, scroll down to the base-64 encoded
h.
version of the certificate, highlight all the text (including
CERTIFICATE -----
the clipboard or to a text file.
Be sure to not make any changes to the certificate. You're required to paste
the encoded certificate into the Installation Wizard next. So, once you've
copied the certificate, go back to the wizard screen (Step 16).
To submit your certificate request manually to a Certificate Manager, follow
these steps:
Open a web browser window.
a.
Go to the end-entity URL for the Certificate Manager that will issue the SSL
b.
server certificate.
For example, if you assigned the port number 17006 to the non-SSL
end-entity port for your root CA, you would go to the URL
http://<hostname>:17006
end entities.
and
-----END CERTIFICATE-----
to bring up the Certificate Manager page for
Chapter 6 Installing Certificate Management System
Stage 2. Running the Installation Wizard
-----BEGIN
), and copy it to
267