Netscape MANAGEMENT SYSTEM 6.01 Installation And Setup Manual page 219

Select Server or Console Installation. "Netscape Servers" is selected by
3.
default. Click Next to accept the default selection.
Choose Installation Directory. The default installation directory is
4.
C:\Netscape\Servers
default, click Browse. Enter a full pathname, or navigate to the location where
you want to install the servers, then click OK.
The location that you enter must be different from the directory from which
you are running the setup program. You must have write access to the
directory. If the directory that you specify does not exist, the program can
create it for you.
Click Next to continue.
Select Products. Four components are selected by default:
5.
Netscape Server Products Core Components.
Netscape Directory Suite
Administration Services
Netscape Certificate Management System
You don't need to select the fifth component, Netscape Directory Server 4.1
Synch Service, unless you want to set up the Directory Server Synchronization
Service. Click Next to accept the default selection.
Directory Server 6.0. "This instance will be the configuration directory server"
6.
is selected by default. If you accept the default setting, the installation script
installs a new instance of Directory Server for use as a configuration directory.
You can also choose to use a previously installed configuration directory. In
this case, select "Use existing configuration directory server," then fill in the
values that identify and provide access to the previously installed directory.
Click Next to continue.
Directory Server 6.0. "Store data in this directory server" is selected by default.
7.
If you accept the default setting, the installation script either adds a
user/group directory to the newly installed instance of Directory Server (if you
accepted the default in step 7) or installs a new instance of Directory Server for
use as a user/group directory.
You can also choose to use a previously installed user/group directory. In this
case, select "Store data in an existing directory server," then fill in the values
that identify and provide access to the previously installed directory. Click
Next to continue.
. To specify a server root directory different from the
Chapter 6
Stage 1. Running the Installation Script
Installing Certificate Management System 219