Step 1. Run The Installation Script-Windows Nt - Netscape MANAGEMENT SYSTEM 6.01 Installation And Setup Manual

Installing the Default Demo
Netscape configuration directory server administrator ID [admin]: Press
17.
Enter to accept the default, then enter the
Suffix [ou=mydomain, ou=com]: Press Enter to accept the default.
18.
Directory Manager DN [cn=Directory Manager]: Press Enter to accept the
19.
default, then enter the
Administration Domain [mydomain.com]: Press Enter to accept the default.
20.
Administration port [random #]: Type
21.
Run Administration Server as [root]: Press Enter to accept the default.
22.
Certificate Management System Server identifier [localhost]: Type
23.
and press Enter. After the script copies the files and updates the system, which
may take a few minutes, press Enter to continue.
The first phase of the installation is now complete. The installation script has
installed Netscape Console, installed and started an Administration Server and its
configuration directory, and copied the files for Certificate Management System.
You are now ready to configure the Certificate Management System instance by
running the Installation Wizard.
Step 1. Run the Installation Script—Windows NT
These instructions assume that you have the initial distribution of Certificate
Management System available, either on a CD or on your hard disk.
If you are using a UNIX system, see "Step 1. Run the Installation Script — UNIX"
on page 110.
To run the installation script, open the distribution directory for the system
1.
software you are using and double-click the file
In the instructions that follow, the name that appears in the title bar of each
setup screen is in bold, followed by a description of the action you should take.
112 Netscape Certificate Management System Installation and Setup Guide • May 2002
<admin password>
<dir mgr password>
4444
.
.
and press Enter.
.
setup.exe
CA
demo