Installing The Certificate Manager As A Subordinate Ca - Netscape MANAGEMENT SYSTEM 6.01 Installation And Setup Manual

Stage 2. Running the Installation Wizard
Configuration Status. This screen should indicate that your configuration has
20.
been successful.
Click Done to exit the Installation Wizard.
Proceed to the next step, "Stage 3. Enrolling for Administrator/Agent
21.
Certificate" on page 271, to create the first agent user for the Certificate
Manager.
Installing the Certificate Manager as a
Subordinate CA
To install the Certificate Manager as a subordinate CA:
Subsystems. Select Certificate Manager.
1.
Click Next to continue.
Remote Data Recovery Manager. Select the appropriate options:
2.
Click Next to continue.
Network Configuration. Type the port numbers for the ports to be used by the
3.
CMS instance. If you want to enable the non-SSL end-entity port, be sure to
check the "Enable" checkbox.
Click Next to continue.
CA's serial number range. Specify range for the serial numbers. In the
4.
"Starting serial number" field, type the lowest serial number the CA should
assign to a certificate. If you only use one CA server, you can leave the "Ending
serial number" field blank to indicate no upper limit. If you plan to clone the
CA to distribute load, you must specify an upper limit. (For cloned CAs, you
must make sure that the range of serial numbers does not overlap with any
other CA server.)
Click Next to continue.
226 Netscape Certificate Management System Installation and Setup Guide • May 2002
If you don't want to connect the Certificate Manager to a remote Data
Recovery Manager, select No.
If you have already installed a remote Data Recovery Manager that you
want the Certificate Manager to use for archiving end users' encryption
private keys, select Yes. Then, enter the remote Data Recovery Manager's
host name and agent SSL port number in the associated fields.