Netscape MANAGEMENT SYSTEM 6.01 Installation And Setup Manual page 217

Do you want to use another directory to store your data? [No]: If you accept
14.
the default setting, the installation script either adds a user/group directory to
the newly installed instance of Directory Server (if you accepted the default in
step 13) or installs a new instance of Directory Server for use as a user/group
directory.
You can also choose to use a previously installed user/group directory. In this
case, enter Yes, then fill in the values that identify and provide access to the
previously installed directory.
Directory server network port [random #]: Accept the default, which is either
15.
389 or a randomly generated number, or enter any port number that is not and
will not be used for another purpose.
If you are using an existing configuration directory, enter its port number.
Directory server identifier [myhost]: Enter a unique identifier for the new
16.
instance of the configuration directory.
If you are using an existing configuration directory, enter its identifier.
Netscape configuration directory server administrator ID [admin]: Enter the
17.
name and password of the user who will authenticate to Netscape Console
with full privileges. The password must be at least eight characters long.
If you are using an existing configuration directory, enter its administrator ID
and password.
Suffix [ou=domaincomponent, ou=com]: Accept the default value for the
18.
suffix, or base DN, to be used for the directory tree.
Directory Manager DN [cn=Directory Manager]: Enter the distinguished
19.
name (DN) and password of the directory manager for the configuration
directory. The password must be at least eight characters long.
This DN can be short and does not need to conform to any suffix configured for
your directory. It also should not correspond to an actual entry stored in your
directory.
Administration Domain [mydomain.com]: Accept the default value. This
20.
domain name identifies the collection of servers that use the same
configuration directory.
Administration port [random #]: Accept the default port number, which is
21.
randomly generated, or enter any port number that is not and will not be used
for another purpose.
Stage 1. Running the Installation Script
Chapter 6 Installing Certificate Management System 217