Netscape MANAGEMENT SYSTEM 6.01 Installation And Setup Manual page 661

At the prompt, enter this:
c.
substituting
<input_file>
encoded certificate and
the base-64 encoded certificate. (The optional
extension; this is required only when running the utility on a Windows NT
system.)
For example, if the file is in
want the base-64 encoded certificate to be in
C:\certificates\cert-1234.txt
BtoA C:\certificates\cert-1234.der
C:\certificates\cert-1234.txt
When the conversion is complete, open the
d.
You should see a base-64 encoded certificate similar to this:
-----BEGIN CERTIFICATE-----
MMIIBtgYJYIZIAYb4QgIFoIIBpzCCAZ8wggGbMIIBRaADAgEAAgEBMA0GCSqGSIb3DQEBBAUAMFcxC
AJBgNVBAYTAlVTMSwwKgYDVQQKEyNOZXRzY2FwZSBDb21tdW5pY2F0aWhfyyuougjgjjgmkgjkgmjg
fjfgjjjgfyjfyj9ucyBDb3Jwb3JhdGlvbjpMEaMBgGA1UECxMRSXNzdWluZyhgdfhbfdpffjphotoo
gdhkBBdXRob3JpdHkwHhcNOTYxMTA4MDkwNzM0WhcNOTgxMTA4MDkwNzMM0WjBXMQswCQYDVQQGEwJ
VUzEsMCoGA1UEChMjTmV0c2NhcGUgQ29tbXVuaWNhdGlvbnMgQ29ycG9yY2F0aW9ucyBDb3Jwb3Jhd
GlvbjpMEaMBgGA1UECxMRSXNzdWluZyBBdXRob3JpdHkwHh
-----END CERTIFICATE-----
Convert the base 64-encoded certificate to a human-readable form using the
3.
Pretty Print Certificate tool (see Chapter 9, "Pretty Print Certificate Tool" of
CMS Command-Line Tools Guide).
To convert the base 64-encoded certificate to a human-readable form:
Check the command window to make sure that you are in this directory:
a.
<server_root>/bin/cert/tools
At the prompt, enter this:
b.
PrettyPrintCert[.bat] <input_file> [<output_file>]
substituting
<input_file>
base-64 encoded certificate and
write the certificate in a human-readable form. If you don't specify an
output file, the certificate information is written to the standard output.
(The optional
running the utility on a Windows NT system.)
BtoA[.bat] <input_file> <output_file>
with the path to the file that contains the DER
<output_file>
C:\certificates\cert-1234.der
with the path to the ASCII file that contains the
<output_file>
specifies the file extension; this is required only when
.bat
Chapter 20
Configuring Certificate Manager to Publish to Files
with the path to the file to write
specifies the file
.bat
, the command would look like this:
file in a text editor.
cert.txt
with the path to the file to
Publishing Certificates and CRLs to a File
and you
661