Step 6. Enable End-Entity Interaction
You can configure end-entity interaction with a Certificate Manager or a
Registration Manager, or with both. End entities cannot interact with a Data
Recovery Manager directly; they must interact through a Certificate Manager or
Registration Manager. By default, the Certificate Manager is configured for
end-entity interaction; the Registration Manager is not configured for end-entity
interaction.
Depending on the subsystem you're configuring, follow the instructions in
"Enabling End-Entity Interaction with a Certificate Manager" on page 519 or in
"Enabling End-Entity Interaction with a Registration Manager" on page 521.
NOTE
Make sure that the required end-entity ports are enabled; see
Chapter 11, "Setting Up Ports."
Enabling End-Entity Interaction with a Certificate Manager
To enable end-entity interaction with a Certificate Manager:
In the CMS window, select the Configuration tab.
1.
In the navigation tree, select Certificate Manager.
2.
The General Setting tab appears.
Configuring Authentication for End-User Enrollment
Chapter 15
Setting Up End-User Authentication
519