Nsslapd-Errorlog (Error Log) - Netscape DIRECTORY SERVER 7.0 Configuration Manual

Default Value:
Syntax:
Example:

nsslapd-errorlog (Error Log)

Specifies the pathname and filename of the log used to record error messages
generated by the Directory Server. These messages can describe error conditions,
but more often they will contain informative conditions such as these:
• Server startup and shutdown times.
• Port number the server uses.
This log will contain differing amounts of information depending on the current
setting of the Log Level attribute. See "nsslapd-errorlog-level (Error Log Level),"
on page 58, for more information.
Entry DN:
Valid Values:
Default Value:
Syntax:
Example:
For error logging to be enabled, this attribute must have a valid path and filename,
and the
nsslapd-errorlog-logging-enabled
switched to
on
these two configuration attributes and their outcome in terms of disabling or
enabling of error logging.
Attributes in dse.ldif
nsslapd-errorlog-logging-enabled
nsslapd-errorlog
nsslapd-errorlog-logging-enabled
nsslapd-errorlog
on
DirectoryString
nsslapd-enquote-sup-oc: off
cn=config
Any valid filename
serverRoot/slapd-serverID/logs/error
DirectoryString
nsslapd-errorlog:
/usr/netscape/servers/slapd-phonebook/logs/error
. The table below lists the four possible combinations of values for
Value
on
empty string
on
filename
Core Server Configuration Attributes Reference
configuration attribute must be
Logging enabled or disabled
Disabled
Enabled
Chapter 2 Core Server Configuration Reference 57