Nsslapd-Errorlog (Error Log) - Netscape DIRECTORY SERVER 6.0 Configuration Manual

nsslapd-errorlog (Error Log)

Specifies the pathname and filename of the log used to record error messages
generated by the Directory Server. These messages can describe error conditions,
but more often they will contain informative conditions such as:
• server startup and shutdown times
• port number the server uses
This log will contain differing amounts of information depending on the current
setting of the Log Level attribute. See "nsslapd-errorlog-level (Error Log Level),"
on page 50 for more information.
Entry DN
cn=config
Valid Range Any valid filename
Default Value
/usr/netscape/servers/slapd-serverID/logs/error
Syntax DirectoryString
Example
nsslapd-errorlog:
/usr/netscape/servers/slapd-serverID/logs/error
For error logging to be enabled this attribute must have a valid path and file name
and the
nsslapd-errorlog-logging-enabled
switched to . The table below lists the four possible combinations of values for
on
these two configuration attributes and their outcome in terms of disabling or
enabling of error logging.
Attributes in dse.ldif
nsslapd-errorlog-logging-enabled
nsslapd-errorlog
nsslapd-errorlog-logging-enabled
nsslapd-errorlog
nsslapd-errorlog-logging-enabled
nsslapd-errorlog
nsslapd-errorlog-logging-enabled
nsslapd-errorlog
Core Server Configuration Attributes Reference
configuration attribute must be
Value
on
empty string
on
filename
off
empty string
off
filename
Chapter 2 Core Server Configuration Reference
Logging enabled or disabled
Disabled
Enabled
Disabled
Disabled
49