Nsslapd-Outbound-Ldap-Io-Timeout; Nsslapd-Plug-In; Nsslapd-Port (Port Number) - Netscape DIRECTORY SERVER 7.0 Configuration Manual

Core Server Configuration Attributes Reference
Entry DN:
Valid Values:
Default Value:
Syntax:
Example:

nsslapd-outbound-ldap-io-timeout

This attribute limits the I/O wait time for all outbound LDAP connections. The
default is
will impose no limit on I/O wait time.
Entry DN:
Valid Range:
Default Value:
Syntax:
Example:

nsslapd-plug-in

This read-only attribute lists the syntaxes and matching rules loaded by the
server.

nsslapd-port (Port Number)

TCP/IP port number used for LDAP communications. If you want to run
SSL/TLS over this port, you can do so through the Start TLS extended operation.
This selected port must be unique on the host system; make sure no other
application is attempting to use the same port number. On UNIX systems,
specifying a port number of less than 1024 requires the Directory Server to run as
root
If you are changing the port number for a configuration directory, you must also
update the corresponding Server Instance Entry in the configuration directory.
Note that you need to restart the server for the port number change to be taken
into account.
72 Netscape Directory Server Configuration, Command, and File Reference • October 2004
cn=config
on | off
off
DirectoryString
nsslapd-nagle: off
milliseconds (5 minutes). A value of
300000
cn=config
0 to the maximum 32 bit integer value (2147483647)
300000
DirectoryString
nsslapd-outbound-ldap-io-timeout: 300000
.
indicates that the server
0