Nsds5Replicatimeout - Netscape DIRECTORY SERVER 7.0 Configuration Manual

• If both attributes are specified, but
than or equal to
nsDS5ReplicaBusyWaitTime
nsDS5ReplicaSessionPauseTime
nsDS5ReplicaBusyWaitTime
When setting the values, ensure that the
is at least 1 second longer than the interval specified for
nsDS5ReplicaBusyWaitTime
reach an acceptable distribution of consumer access among the suppliers.
You can set the
nsDS5ReplicaSessionPauseTime
changetype:modify
next update session if one is already in progress.
If Directory Server has to reset the value of
automatically, the value is changed internally only. The change is not visible to
clients, and it not saved to the configuration file. From an external viewpoint, the
attribute value appears as originally set.
Entry DN:
cn=ReplicationAgreementName,cn="suffixName",cn=mapping
tree,cn=config
Valid Values: Any valid integer
Default Value:
0
Syntax: Integer
Example:
nsDS5ReplicaSessionPauseTime: 0

nsDS5ReplicaTimeout

This allowed attribute specifies the number of seconds outbound LDAP operations
will wait for a response from the remote replica before timing out and failing. If
you see
"Warning: timed out waiting"
should increase the value of this attribute.
You can find out the amount of time the operation actually lasted by examining the
access log on the remote machine, and then set the
accordingly to optimize performance.
Entry DN:
cn=ReplicationAgreementName,cn="suffixName",cn=mapping
tree,cn=config
Valid Range: 0 to maximum 32-bit integer value (2147483647) in seconds
nsDS5ReplicaSessionPauseTime
is set automatically to 1 second more than
.
nsDS5ReplicaSessionPauseTime
. You may increase the interval as needed until you
with the operation. The change takes effect for the
replace
Chapter 2
Core Server Configuration Attributes Reference
,
attribute at any time by using
nsDS5ReplicaSessionPauseTime
messages in the error log file, then you
nsDS5ReplicaTimout
Core Server Configuration Reference
is less
interval
attribute
113