Nsslapd-Db-Idl-Divisor - Netscape DIRECTORY SERVER 7.0 Configuration Manual

Database Plug-in Attributes
NOTE
Entry DN:
Valid Values:
Default Value:
Syntax:
Example:

nsslapd-db-idl-divisor

Specifies the index block size in terms of the number of blocks per database page.
The block size is calculated by dividing the database page size by the value of this
attribute. A value of 1 makes the block size exactly equal to the page size. The
default value of 0 sets the block size to the page size minus an estimated
allowance for internal database overhead.
Before modifying the value of this attribute, export all databases using the
db2ldif
the
ldif2db
158 Netscape Directory Server Configuration, Command, and File Reference • October 2004
The directory referenced by the
attribute must be a subdirectory of a file system of type
(such as ). However, Directory Server does not create the
/tmp
subdirectory referenced by this attribute. You must create the
directory either manually or by using a script. Failure to create the
directory referenced on the
will result in Directory Server being unable to start.
Also, if you have multiple Directory Servers on the same machine,
their
nsslapd-db-home-directory
with different directories. Failure to do so will result in the
databases for both directories becoming corrupted.
Finally, use of this attribute causes internal Directory Server
database files to be moved to the directory referenced by the
attribute. It is possible, but unlikely, that the server will no longer
start after the files have been moved because not enough memory
can be allocated. This is a symptom of an overly large database
cache size being configured for your server. If this happens, reduce
the size of your database cache size to a value where the server will
start again.
cn=config,cn=ldbm database,cn=plugins,cn=config
Any valid directory name in a tempfs file system, such as /tmp.
N/A
DirectoryString
nsslapd-db-home-directory: /tmp/slapd-phonebook
script. Once the modification has been made, reload the databases using
script.
nsslapd-db-home-directory
nsslapd-db-home-directory
attributes must be configured
tempfs
attribute