Nsslapd-Changelogmaxentries (Max Changelog Records); Cn=Encryption; Nssslsessiontimeout - Netscape DIRECTORY SERVER 7.0 Configuration Manual

nsslapd-changelogmaxentries (Max Changelog Records)

Specifies the maximum number of records the change log may contain. If this
attribute is absent, there is no maximum number of records the change log can
contain. For information on the change log, see "nsslapd-changelogdir," on
page 93.
Entry DN:
cn=changelog5,cn=config
Valid Range: 0 (meaning that the only maximum limit is the disk size) to maximum
32-bit integer (2147483647)
Default Value:
0
Syntax: Integer
Example:
nsslapd-changelogmaxentries: 5000

cn=encryption

Encryption related attributes are stored under the
entry. The
cn=encryption,cn=config
nsslapdEncryptionConfig
taken into account by the server, this object class (in addition to the
class) must be present in the entry. Encryption configuration attributes are
presented in this section.

nssslsessiontimeout

Specifies the lifetime duration of an SSL session for both SSLv2 and SSLv3. The
minimum timeout value is
automatically replaced by
by the default value of
Entry DN:
cn=encryption,cn=config
Valid Range: SSLv2 - 5 seconds to 100 seconds
SSLv3 - 5 seconds to 24 hours
Default Value: 0, which stands for 100 seconds if you are running SSLv2 and 24
hours if you are running SSLv3.
Syntax: Integer
Example:
nssslsessiontimeout: 5
entry is an instance of the
object class. For encryption related attributes to be
seconds, and, if you enter a value below this, then it is
5
seconds. Values outside the valid ranges are replaced
5
seconds (SSLv2).
100
Chapter 2
Core Server Configuration Attributes Reference
cn=encryption,cn=config
top
Core Server Configuration Reference
object
95