Database Attributes - Netscape DIRECTORY SERVER 7.0 Configuration Manual

Table 6-2 Attributes in cn=config Not Automatically Migrated (Continued)
Attribute Name
nsslapd-auditlog
nsslapd-accesslog-level
nsslapd-errorlog
nsslapd-errorlog-list
nsslapd-instancedir
nsslapd-maxbersize
nsslapd-plug-in
nsslapd-result-tweak
nsslapd-return-exact-case
nsslapd-threadnumber
nsslapd-maxthreadsperconn

Database Attributes

All general database configuration attributes are automatically migrated. These
attributes are stored in the entry
cn=plugins,cn=config
Database-specific attributes are stored in entries of the form
cn=database_instance_name,cn=ldbm database,cn=config
migrated are listed in Table 6-4; the ones that are not migrated are listed in
Table 6-5.
Table 6-3 General Database Attributes Automatically Migrated
nsslapd-idlistscanlimit
nsslapd-lookthroughlimit
Reason for not Migrating Automatically
Pathname to the log that records changes made to the
directory database. It is set up during installation.
Read-only attribute.
Pathname to the log that records error messages
generated by Directory Server. It is set up during
installation.
Read-only attribute.
Configured during the installation process.
Do not change the value of this attribute unless told to
do so by Netscape Technical Support.
Reserved for future use. Do not change or remove.
Doing so can have unpredictable results
Do not modify unless you have legacy client
applications that can check the case of attribute names
in results returned from the server.
This attribute is not available from the Directory
Server Console.
This attribute corresponds to a system parameter.
cn=config,cn=ldbm database,
and are listed in Table 6-3.
Chapter 6
Migrated Configuration Attributes
. The attributes that are
Migration from Earlier Versions 221