Nsslapd-Errorlog-Logrotationtime (Error Log Rotation Time) - Netscape DIRECTORY SERVER 7.0 Configuration Manual

Although it is not recommended for performance reasons to specify no log
rotation, as the log will grow indefinitely, you have two ways of specifying this.
Either you set the
nsslapd-errorlog-maxlogsperdir
nsslapd-errorlog-logrotationtime
nsslapd-errorlog-maxlogsperdir
larger than , the server then checks the
1
attribute. See "nsslapd-errorlog-maxlogsperdir (Maximum Number of Error Log
Files)," on page 65, for more information.
Entry DN:
cn=config
Valid Range: -1 | 1 to the maximum 32 bit integer value (2147483647), where a
value of -1 means that the time between error log file rotation is
unlimited).
Default Value:
1
Syntax: Integer
Example:
nsslapd-errorlog-logrotationtime: 100

nsslapd-errorlog-logrotationtime (Error Log Rotation Time)

Specifies the time between error log file rotations. The error log will be rotated
when this time interval is up, regardless of the current size of the error log. This
attribute supplies only the number of units. The units (day, week, month, and so
forth) are given by the
Rotation Time Unit) attribute.
Although it is not recommended for performance reasons to specify no log
rotation, as the log will grow indefinitely, you have two ways of specifying this.
Either you set the
nsslapd-errorlog-maxlogsperdir
nsslapd-errorlog-logrotationtime
nsslapd-errorlog-maxlogsperdir
larger than 1, the server then checks the
attribute. See "nsslapd-errorlog-maxlogsperdir (Maximum Number of Error Log
Files)," on page 65, for more information.
Entry DN:
cn=config
Valid Range: -1 | 1 to the maximum 32 bit integer value (2147483647), where a
value of -1 means that the time between error log file rotation is
unlimited).
Default Value:
1
attribute to
attribute first, and, if this attribute value is
nsslapd-errorlog-logrotationtime
nsslapd-errorlog-logrotationtimeunit
attribute to
attribute first, and, if this attribute value is
nsslapd-errorlog-logrotationtime
Chapter 2
Core Server Configuration Attributes Reference
attribute value to
. The server checks the
-1
(Error Log
attribute value to
. The server checks the
-1
Core Server Configuration Reference
or the
1
or the
1
63