Nsds5Replicatimeout; Nsds5Replicatransportinfo - Netscape DIRECTORY SERVER 6.2 Configuration Manual

Default Value:
0
Syntax: Integer
Example:
nsDS5ReplicaSessionPauseTime: 0

nsDS5ReplicaTimeout

This allowed attribute specifies the number of seconds outbound LDAP operations
will wait for a response from the remote replica before timing out and failing. If
you see
"Warning: timed out waiting"
should increase the value of this attribute.
You can find out the amount of time the operation actually lasted by examining the
access log on the remote machine and then set the
accordingly to optimize performance.
Entry DN:
cn=ReplicationAgreementName,cn="suffixName",cn=mapping
tree,cn=config
Valid Range: 0 to maximum integer value (2147483647) in seconds
Default Value:
600
Syntax: Integer
Example:
nsDS5ReplicaTimeout: 600 seconds

nsDS5ReplicaTransportInfo

Specifies the type of transport used for transporting data to and from the replica.
The attribute values can either be SSL which means that the connection is
established over SSL, or LDAP, which means that regular LDAP connections are
used. If this attribute is
attribute cannot be modified once set.
Entry DN:
cn=ReplicationAgreementName,cn="suffixName",cn=mapping
tree,cn=config
Valid Values: SSL | LDAP
Default Value:
absent
Syntax: DirectoryString
Example:
nsDS5ReplicaTransportInfo: LDAP
messages in the error log file, then you
then regular LDAP connections are used. This
absent
Chapter 2
Core Server Configuration Attributes Reference
nsDS5ReplicaTimout
Core Server Configuration Reference
attribute
113