Red Hat ENTERPRISE LINUX AS 2.1 Installation Manual page 152

152 Chapter 9:Configuring the LVS Routers with Piranha Configuration Tool
gratuitous lvs arps finished
To stop watching /var/log/messages, type [Ctrl]-[c] .
From this point on, the primary LVS router is also the active LVS router. While you can make requests
to the cluster at this point, you should start the backup LVS router before putting the cluster into
service. To do this, simply repeat the process described above on the backup LVS router node.
After completing this final step, the cluster will be up and running.