Red Hat ENTERPRISE LINUX AS 2.1 Installation Manual page 144

144
If an administrator needs persistent connections to the virtual server during client transactions,
enter the number of seconds of inactivity allowed to lapse before a connection times out in this
text field.
Persistence Network Mask
To limit persistence to particular subnet, select the appropriate network mask from the drop-
down menu.
Remember to click the
panel. To make sure you do not lose changes when selecting a new panel.
9.6.2
REAL SERVER
Clicking on the
subsection. It displays the status of the physical server hosts for a particular virtual service.
SERVER
Chapter 9:Configuring the LVS Routers with Piranha Configuration Tool
If you entered a value in the
enter a value for persistence as well. Also, be sure that if you use
firewall marks and persistence together, that the amount of persistence
is the same for each virtual server with the firewall mark. For more
on persistence and firewall marks, see Section 6.5, Persistence and
Firewall Marks.
Before the advent of firewall marks, persistence limited by subnet was
a crude way of bundling connections. Now, it is best to use persistence
in relation to firewall marks to achieve the same result.
ACCEPT
Subsection
subsection link at the top of the panel displays the
REAL SERVER
Important
field above, you should
Firewall Mark
Note
WARNING
button after making any changes in this
EDIT REAL