Virtual Servers - Red Hat ENTERPRISE LINUX AS 2.1 Installation Manual

140
Heartbeat runs on port
This field sets the port at which the heartbeat communicates with the primary LVS node. The
default is set to 539 if this field is left blank.
Remember to click the
panel to make sure you do not lose any changes when selecting a new
panel.
9.6

VIRTUAL SERVERS

The
VIRTUAL SERVERS
table entry shows the status of the virtual server, the server name, the virtual IP assigned to the server,
the netmask of the virtual IP, the port number to which the service communicates, the protocol used,
and the virtual device interface.
Figure 9–5 The VIRTUAL SERVERS Panel
Chapter 9:Configuring the LVS Routers with Piranha Configuration Tool
ACCEPT
panel displays information for each currently defined virtual server. Each
WARNING
button after making any changes in this