Red Hat ENTERPRISE LINUX 5 - DEPLOYMENT Deployment Manual page 596

Chapter 41. General Parameters and Modules
Hardware
Myricom 10G driver (10GbE)
570
Module
myri10ge.ko
Parameters
FlowControl — Flow Control
setting
XsumRX — Disable or enable
Receive Checksum offload
TxIntDelay — Transmit
Interrupt Delay
TxAbsIntDelay — Transmit
Absolute Interrupt Delay
RxIntDelay — Receive
Interrupt Delay
RxAbsIntDelay — Receive
Absolute Interrupt Delay
InterruptThrottleRate —
Interrupt Throttling Rate
SmartPowerDownEnable —
Enable PHY smart power down
KumeranLockLoss — Enable
Kumeran lock loss workaround
myri10ge_fw_name —
Firmware image name
myri10ge_ecrc_enable —
Enable Extended CRC on PCI-
E
myri10ge_max_intr_slots
— Interrupt queue slots
myri10ge_small_bytes —
Threshold of small packets
myri10ge_msi — Enable
Message Signalled Interrupts
myri10ge_intr_coal_delay
— Interrupt coalescing delay
myri10ge_flow_control —
Pause parameter
myri10ge_deassert_wait
— Wait when deasserting
legacy interrupts