Red Hat ENTERPRISE LINUX 5 - DEPLOYMENT Deployment Manual page 208

Chapter 15. Network Configuration
4. If you have already added the token ring card to the hardware list, select it from the Tokenring
card list. Otherwise, select Other Tokenring Card to add the hardware device.
5. If you selected Other Tokenring Card, the Select Token Ring Adapter window as shown in
Figure 15.14, "Token Ring Settings"
Select the device name. If this is the system's first token ring card, select tr0; if this is the second
token ring card, select tr1 (and so on). The Network Administration Tool also allows the user to
configure the resources for the adapter. Click Forward to continue.
Figure 15.14. Token Ring Settings
6. On the Configure Network Settings page, choose between DHCP and static IP address. You
may specify a hostname for the device. If the device receives a dynamic IP address each time the
network is started, do not specify a hostname. Click Forward to continue.
7. Click Apply on the Create Tokenring Device page.
After configuring the token ring device, it appears in the device list as shown in
Ring Device".
182
appears. Select the manufacturer and model of the adapter.
Figure 15.15, "Token