Printing A Test Page; Modifying Existing Printers; The Settings Tab - Red Hat ENTERPRISE LINUX 5 - DEPLOYMENT Deployment Manual

Chapter 34. Printer Configuration
After applying the changes, print a test page to ensure the configuration is correct. Refer to
Section 34.6, "Printing a Test Page"
for details.

34.6. Printing a Test Page

After you have configured your printer, you should print a test page to make sure the printer is
functioning properly. To print a test page, select the printer that you want to try out from the printer list,
then click Print Test Page from the printer's Settings tab.
If you change the print driver or modify the driver options, you should print a test page to test the
different configuration.

34.7. Modifying Existing Printers

To delete an existing printer, select the printer and click the Delete button on the toolbar. The printer is
removed from the printer list once you confirm deletion of the printer configuration.
To set the default printer, select the printer from the printer list and click the Make Default Printer
button in the Settings tab.

34.7.1. The Settings Tab

To change printer driver configuration, click the corresponding name in the Printer list and click the
Settings tab.
You can modify printer settings such as make and model, make a printer the default, print a test page,
change the device location (URI), and more.
Figure 34.8. Settings Tab
498