Red Hat ENTERPRISE LINUX 5 - DEPLOYMENT Deployment Manual page 591

Hardware
HP Smart Array
LSI Logic MPT Fusion
Module
cciss.ko
mptbase.ko mptctl.ko
mptfc.ko mptlan.ko mptsas.ko
mptscsih.ko mptspi.ko
Storage parameters
Parameters
lpfc_nodev_tmo — Seconds
driver will hold I/O waiting for a
device to come back
lpfc_topology — Select
Fibre Channel topology
lpfc_link_speed — Select
link speed
lpfc_fcp_class — Select
Fibre Channel class of service
for FCP sequences
lpfc_use_adisc — Use
ADISC on rediscovery to
authenticate FCP devices
lpfc_ack0 — Enable ACK0
support
lpfc_cr_delay — A count
of milliseconds after which an
interrupt response is generated
lpfc_cr_count — A count of
I/O completions after which an
interrupt response is generated
lpfc_multi_ring_support
— Determines number of
primary SLI rings to spread
IOCB entries across
lpfc_fdmi_on — Enable
FDMI support
lpfc_discovery_threads
— Maximum number of ELS
commands during discovery
lpfc_max_luns — Maximum
allowed LUN
lpfc_poll_tmo —
Milliseconds driver will wait
between polling FCP ring
mpt_msi_enable — MSI
Support Enable
565