Nsslapd-Changelogmaxentries (Max Changelog Records); Cn=Encryption; Nssslsessiontimeout: 5 - Red Hat DIRECTORY SERVER 7.1 Configuration

Core Server Configuration Attributes Reference

nsslapd-changelogmaxentries (Max Changelog Records)

Specifies the maximum number of records the changelog may contain. If this
attribute is absent, there is no maximum number of records the changelog can
contain. For information on the changelog, see "nsslapd-changelogdir," on
page 92.
Entry DN:
Valid Range:
Default Value:
Syntax:
Example:

cn=encryption

Encryption related attributes are stored under the
entry. The
nsslapdEncryptionConfig
taken into account by the server, this object class (in addition to the
class) must be present in the entry. Encryption configuration attributes are
presented in this section.
nssslsessiontimeout
Specifies the lifetime duration of an SSL session for both SSLv2 and SSLv3. The
minimum timeout value is
is automatically replaced by
replaced by the default value of
Entry DN:
Valid Range:
Default Value:
Syntax:
Example:
94 Red Hat Directory Server Configuration, Command, and File Reference • May 2005
cn=changelog5,cn=config
0 (meaning that the only maximum limit is the disk size) to maximum
32-bit integer (2147483647)
0
Integer
nsslapd-changelogmaxentries: 5000
cn=encryption,cn=config
object class. For encryption related attributes to be
seconds, and, if you enter a value below this, then it
5
seconds. Values outside the valid ranges are
5
cn=encryption,cn=config
SSLv2 - 5 seconds to 100 seconds
SSLv3 - 5 seconds to 24 hours
0, which stands for 100 seconds if you are running SSLv2 and 24
hours if you are running SSLv3.
Integer

nssslsessiontimeout: 5

cn=encryption,cn=config
entry is an instance of the
seconds (SSLv2).
100
object
top