Nsds5Replicacredentials; Nsds5Replicahost; Nsds5Replicalastinitend - Red Hat DIRECTORY SERVER 7.1 Configuration

nsDS5ReplicaCredentials

Specifies the credentials for the bind DN (specified in the
attribute) on the remote server containing the consumer replica. The value for this
attribute can be modified. When certificate-based authentication is used, this
attribute may not have a value. The example below is what you view, not what you
type.
Entry DN:
cn=ReplicationAgreementName,cn=replica,cn="suffixName",cn=
mapping tree,cn=config
Valid Values: Any valid password, which will then by encrypted using the DES
reversible password encryption schema.
Default Value: N/A
Syntax: DirectoryString {DES} encrypted_password
Example:
nsDS5ReplicaCredentials: {DES} 9Eko69APCJfFReplica

nsDS5ReplicaHost

Specifies the hostname for the remote server containing the consumer replica. Once
this attribute has been set, it cannot be modified.
Entry DN:
cn=ReplicationAgreementName,cn=replica,cn="suffixName",cn=
mapping tree,cn=config
Valid Values: Any valid host server name
Default Value: N/A
Syntax: DirectoryString
Example:
nsDS5ReplicaHost: MyServer

nsDS5ReplicaLastInitEnd

This optional, read-only attribute states when the initialization of the consumer
replica ended.
Entry DN:
cn=ReplicationAgreementName,cn=replica,cn="suffixName",cn=
mapping tree,cn=config
Valid Values: N/A
Core Server Configuration Attributes Reference
nsDS5ReplicaBindDN
Chapter 2 Core Server Configuration Reference 107