Nsslapd-Db-Page-Rw-Evict-Rate; Nsslapd-Db-Page-Trickle-Rate; Nsslapd-Db-Page-Write-Rate; Nsslapd-Db-Pages-In-Use - Red Hat DIRECTORY SERVER 7.1 Configuration

nsslapd-db-page-rw-evict-rate

Dirty pages forced from the cache.

nsslapd-db-page-trickle-rate

Dirty pages written using the memp_trickle interface.

nsslapd-db-page-write-rate

Pages read into the cache.

nsslapd-db-pages-in-use

All pages, clean or dirty, currently in use.

nsslapd-db-txn-region-wait-rate

Number of times that a thread of control was force to wait before obtaining the
region lock.
Database Attributes under cn=default
indexes,cn=config,cn=ldbm database,
cn=plugins,cn=config
The set of default indexes is stored here. Default indexes are configured per
backend in order to optimize Directory Server functionality for the majority of
setup scenarios. All indexes, except system-essential ones, can be removed, but
care should be taken so as not to cause unnecessary disruptions. For further
information on indexes, see chapter 10, "Managing Indexes," in the Red Hat
Directory Server Administrator's Guide.

nsSystemIndex

This mandatory attribute specifies whether the index is a system index, an index
which is vital for Directory Server operations. If this attribute has a value of
then it is system-essential. System indexes should not be removed, as this will
seriously disrupt server functionality.
Entry DN:
cn=default indexes,cn=config,cn=ldbm
database,cn=plugins,cn=config
Valid Values:
true | false
Chapter 3 Plug-in Implemented Server Functionality Reference
Database Plug-in Attributes
,
true
181