Nsds5Replicatombstonepurgeinterval; Nsds5Replicatype; Nsstate - Red Hat DIRECTORY SERVER 7.1 Configuration

Example:
nsDS5ReplicaRoot: "dc=example,dc=com"

nsDS5ReplicaTombstonePurgeInterval

Specifies the time interval in seconds between purge operation cycles. When
setting this attribute, remember that the purge operation is time-consuming.
Entry DN:
cn=replica,cn="suffixName",cn=mapping tree,cn=config
Valid Range: 0 to maximum 32-bit integer (2147483647) in seconds
Default Value: 3600 (1 hour)
Syntax: Integer
Example:
nsDS5ReplicaTombstonePurgeInterval: 3600

nsDS5ReplicaType

Defines the type of replication relationship that exists between this replica and the
others.
Entry DN:
cn=replica,cn="suffixName",cn=mapping tree,cn=config
Valid Values:
0 | 1 | 2 | 3
0 = unknown
1 = primary (not yet used)
2 = consumer (read-only)
3 = consumer/supplier (updateable)
Default Value: N/A
Syntax: Integer
Example:
nsDS5ReplicaType: 2

nsState

This attribute stores information on the state of the clock. It is designed only for
internal use to ensure that the server cannot generate a change sequence number
( ) inferior to existing ones required for detecting backward clock errors.
csn
Core Server Configuration Attributes Reference
Chapter 2 Core Server Configuration Reference 103