Nsslapd-Errorlog-Logrotationsync-Enabled (Error Log Rotation Sync Enabled); Nsslapd-Errorlog-Logrotationsynchour (Error Log Rotation Sync Hour) - Red Hat DIRECTORY SERVER 7.1 Configuration

Valid Range: 1 to the maximum 32 bit integer value (2147483647)
Default Value:
5
Syntax: Integer
Example:
nsslapd-errorlog-logminfreediskspace: 5
nsslapd-errorlog-logrotationsync-enabled (Error Log Rotation Sync
Enabled)
Specifies whether error log rotation is to be synchronized with a particular time of
the day. Synchronizing log rotation this way enables you to generate log files at a
specified time during a day, such as midnight to midnight every day. This makes
analysis of the log files much easier because they then map directly to the calendar.
For error log rotation to be synchronized with time-of-day, this attribute must be
enabled with the
nsslapd-errorlog-logrotationsynchour
nsslapd-errorlog-logrotationsyncmin
minute of the day for rotating log files.
For example, to rotate error log files every day at midnight, enable this attribute by
setting its value to
on
nsslapd-errorlog-logrotationsynchour
nsslapd-errorlog-logrotationsyncmin
Entry DN:
cn=config
Valid Values:
on | off
Default Value:
on
Syntax: DirectoryString
Example:
nsslapd-errorlog-logrotationsync-enabled: on

nsslapd-errorlog-logrotationsynchour (Error Log Rotation Sync Hour)

Specifies the hour of the day for rotating error logs. This attribute must be used in
conjunction with
nsslapd-errorlog-logrotationsync-enabled
nsslapd-errorlog-logrotationsyncmin
Entry DN:
cn=config
Valid Range: 0 through 23
, and then set the values of the
Core Server Configuration Attributes Reference
and
attribute values set to the hour and
and
attributes to .
0
attributes.
Chapter 2 Core Server Configuration Reference
and
61